Sniffer upgrade

This guide provides step-by-step instructions for upgrading or downgrading the VoIPmonitor sensor (sniffer). There are two primary methods: using the Web GUI for simplicity, or performing a manual update via the command line for more control.

Method 1: Upgrading via the Web GUI (Recommended)

This is the easiest and safest way to manage your sensor versions. This method only works for sensors that are currently running and connected to the GUI.

1. Navigate to Settings -> Sensors in the VoIPmonitor GUI.
2. Find the sensor you wish to update. If you need to see more details or older versions, click the [+] icon to expand the sensor's information.
3. Click the blue UPGRADE button. A dropdown menu will appear.
4. Select the desired version from the list. The list will contain the latest stable release as well as several previous versions for downgrading.
5. The GUI will automatically handle the download and restart of the remote sensor service.

Method 2: Manual Upgrade/Downgrade (via Command Line)

This method gives you full control and is necessary if the GUI method is not available or if you need to install a specific development build.

Step 1: Stop the Running Sniffer

First, log in to the sensor's server via SSH and stop the service. For modern systems using systemd:

systemctl stop voipmonitor

For older systems using SysV init:

/etc/init.d/voipmonitor stop

Tip: If the service fails to stop, you may need to terminate the process manually as a last resort: `killall -9 voipmonitor`

Step 2: Download the Sniffer Archive

Download the latest stable static binary from the official VoIPmonitor website. This package contains all necessary files.

# This command downloads the latest stable 64-bit static sniffer
wget https://www.voipmonitor.org/current-stable-sniffer-static-64bit.tar.gz -O voipmonitor-sniffer.tar.gz

If you need a specific older version or a special build (like one with SS7 support), you must get the direct download link from the support team or historical archives and use it with the `wget` command.

Step 3: Install the New Binary

# Extract the downloaded archive
tar xzf voipmonitor-sniffer.tar.gz

# Navigate into the new directory. The wildcard (*) handles any version number.
cd voipmonitor-*-static

# (Recommended) Back up your old binary
mv /usr/local/sbin/voipmonitor /usr/local/sbin/voipmonitor.backup

# Copy the new binary into place
cp ./voipmonitor /usr/local/sbin/voipmonitor

# Ensure the new binary is executable
chmod +x /usr/local/sbin/voipmonitor

Step 4: Start the Service

Finally, start the sniffer service again.

systemctl start voipmonitor

Or for older systems:

/etc/init.d/voipmonitor start

Verifying the Version

After an upgrade or downgrade, it's important to verify that the correct version is running.

Local Check

You can check the version directly from the binary on the sensor's server:

/usr/local/sbin/voipmonitor --version

Or, for more detail:

/usr/local/sbin/voipmonitor | head

Remote Check (via Manager API)

If the sniffer is running, you can query its version remotely using its manager API (default port 5029):

echo 'sniffer_version' | nc 127.0.0.1 5029

AI Summary for RAG

Summary: This guide details the procedures for upgrading or downgrading the VoIPmonitor sensor. It presents two primary methods. The first and recommended method is using the Web GUI, by navigating to "Settings -> Sensors" and selecting a new version from the upgrade dropdown menu. The second method is a manual update via the command line, which involves four steps: 1) Stopping the voipmonitor service (`systemctl stop voipmonitor`). 2) Downloading the desired static binary `tar.gz` package using `wget`. 3) Backing up the old binary, copying the new one to `/usr/local/sbin/`, and setting execute permissions with `chmod`. 4) Starting the service again. The article concludes by showing how to verify the currently installed version, both locally (`voipmonitor --version`) and remotely via the manager API. Keywords: upgrade, downgrade, update, sniffer, sensor, install, new version, old version, GUI upgrade, manual upgrade, command line, CLI, wget, tar.gz, systemctl, service, check version, verify, voipmonitor.org/download Key Questions:

• How do I upgrade the VoIPmonitor sniffer?
• How can I downgrade the sensor to a previous version?
• What is the easiest way to update my remote sensors?
• How do I perform a manual upgrade of the sniffer using the command line?
• How can I check which version of the sniffer I am currently running?
• Where can I download the latest stable sniffer binary?