Difference between revisions of "Windows rpcapd"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
== Steps for enable live sniffer as a service on Windows == | == Steps for enable live sniffer as a service on Windows == | ||
'' (tested on 8.1 64b, IP 192.168.88.247) '' | '' (tested on 8.1 64b, IP 192.168.88.247) '' | ||
| − | * | + | * Instal windows wireshark including wincap driver=== |
| − | * | + | * Locate winpcap file (c:\Program Files (x86)\WinPcap) |
| + | * In winpcap folder we create config file for 'Remote Packet Capture' service (and set there IP from which we can access this service) | ||
| + | rpcapd.exe -s rpcapd.ini -l 192.168.88.243 | ||
| + | press CTRL+C and check existence of file rpcapd.ini | ||
| + | |||
| + | PC settings->services->remote packet capture->start | ||
| + | * we can chec | ||
== Steps for enable live capture using rpcap from remote PC == | == Steps for enable live capture using rpcap from remote PC == | ||
'' (tested on linux Wheezy, IP 192.168.88.243) '' | '' (tested on linux Wheezy, IP 192.168.88.243) '' | ||
Revision as of 13:37, 15 October 2014
Steps for enable live sniffer as a service on Windows
(tested on 8.1 64b, IP 192.168.88.247)
- Instal windows wireshark including wincap driver===
- Locate winpcap file (c:\Program Files (x86)\WinPcap)
- In winpcap folder we create config file for 'Remote Packet Capture' service (and set there IP from which we can access this service)
rpcapd.exe -s rpcapd.ini -l 192.168.88.243 press CTRL+C and check existence of file rpcapd.ini
PC settings->services->remote packet capture->start
- we can chec
Steps for enable live capture using rpcap from remote PC
(tested on linux Wheezy, IP 192.168.88.243)