...MYSQLIP -u MYSQLUSER -pPASSWORD -e 'select id_sensor,host from voipmonitor.sensors\G'",$out,$rc);
$sensors=array();
...
1 KB (171 words) - 10:27, 9 March 2021
...oring) | Central server | Central server processes raw packets from remote sensors
;1. Check the <code>packetbuffer_sender</code> setting on your remote sensors:
...
3 KB (452 words) - 20:18, 5 January 2026
* Sensor version shown in Settings > Sensors meets the requirement
* One or more sensors configured with IP address <code>127.0.0.1</code>
...
9 KB (1,252 words) - 20:31, 21 January 2026
=== B. Monitoring Hardware Health (Sensors Plugin) ===
...nsors` plugin reads temperature, voltage, and fan speed data from hardware sensors on your server's motherboard and CPU.
...
9 KB (1,112 words) - 21:35, 30 June 2025
# Navigate to '''Settings → Sensors'''
When upgrading many sensors simultaneously, you may encounter '''429 Too Many Requests''' errors from <
...
11 KB (1,477 words) - 16:48, 8 January 2026
* '''Filter by sensor''' - If multiple sensors capture the same mirrored traffic
'''Enable via GUI:''' Settings > Sensors > wrench icon > enable <code>active_call_info</code>
...
6 KB (867 words) - 01:53, 20 January 2026
...gs->sensors that the client with its id_sensor were autoadded into list of sensors.
...
4 KB (577 words) - 15:13, 28 July 2020
...calls and send only CDRs (metadata). Good for low bandwidth. PCAPs stay on sensors.
** '''Packet Mirroring''' (`packetbuffer_sender=yes`): Remote sensors send raw packets to central server. Central server does all processing. Goo
...
17 KB (2,475 words) - 17:59, 6 January 2026
...covers backing up and restoring VoIPmonitor GUI configuration data (users, sensors, alerts, dashboards). It does '''not''' cover CDR/PCAP data backup.
* '''Configuration Tables:''' Users, sensors, capture rules, alerts, dashboards, reports
...
9 KB (1,244 words) - 16:48, 8 January 2026
* '''Sensor upgrades''' via Settings > Sensors
Restrict users to specific sensors:
...
11 KB (1,502 words) - 12:04, 19 January 2026
* '''Prevent CDR merging from multiple sensors in packet mirroring mode''' (see below)
When multiple sensors send packets to a '''single receiver instance''' in packet mirroring mode (
...
7 KB (862 words) - 17:32, 10 January 2026
...oring) | Central server | Central server processes raw packets from remote sensors
;1. Check the <code>packetbuffer_sender</code> setting on your remote sensors:
...
8 KB (1,056 words) - 18:38, 9 January 2026
= Sensors =
...mote database || Database connection for "Legs by CID/header" lookups when sensors use different databases
...
18 KB (2,588 words) - 12:17, 22 January 2026
A[GUI Slow / OOM Errors] --> B{Check RRD Charts<br/>Settings → Sensors → 📊}
# Navigate to '''Settings → Sensors'''
...
6 KB (905 words) - 16:48, 8 January 2026
...eb GUI. The GUI is a PHP web application for viewing CDR data and managing sensors.
=== Add Sensors (Multi-Sensor Setup) ===
...
11 KB (1,521 words) - 01:18, 10 January 2026
| Same call captured by 2 sensors || 1 || Deduplicated if last 6 digits match (±10s window)
'''Deduplication logic:''' The GUI deduplicates CDRs across sensors if the last 6 digits of caller and called numbers match within a ±10-second
...
13 KB (1,820 words) - 10:54, 13 January 2026
This guide covers deploying multiple VoIPmonitor sensors in a distributed architecture using Client-Server mode (v20+).
For deployment options including on-host vs dedicated sensors and traffic forwarding methods (SPAN, GRE, TZSP, VXLAN), see [[Sniffing_mod
...
24 KB (3,230 words) - 20:19, 21 January 2026
..., additional steps are required to enable millisecond precision across all sensors.
:In the GUI, navigate to '''Settings -> Sensors''' and check that the uptime for each sensor reflects the recent restart.
...
14 KB (2,089 words) - 18:01, 6 January 2026
I --> J["2. ipv6=yes on sensors"]
J --> K[3. Restart sensors]
...
12 KB (1,760 words) - 18:00, 6 January 2026
The '''SQLq/SQLf''' values in '''Settings → Sensors → Status''' show the queue size before CDRs are pushed to database.
...setup to '''single sensor''' writing to database. Do not use with multiple sensors.}}
...
13 KB (1,828 words) - 21:30, 20 January 2026