Blog

VoIPmonitor Development Blog

This page contains announcements about new features and improvements in VoIPmonitor sniffer and GUI.

January 2026: Enhanced Sensor Monitoring & Disk I/O Analytics

We are excited to announce major improvements to sensor monitoring capabilities in both the sniffer and GUI.

New Disk I/O Monitoring System

The sniffer now includes comprehensive disk I/O monitoring with automatic calibration:

• Automatic Baseline Calibration - On startup, the sniffer performs a quick calibration to determine your disk's baseline performance (throughput knee point and baseline latency)
• Real-time Metrics - Continuous monitoring of:
  • Disk utilization percentage
  • Capacity percentage (relative to calibrated knee point)
  • Write/Read throughput (MB/s)
  • Write/Read IOPS
  • Write latency with comparison to baseline
  • I/O queue depth
• Saturation Detection - Automatic detection when disk cannot keep up with spool writes, displayed in syslog status line as DISK_SAT or IO_WARN
• New RRD Graphs - Three new graph types:
  • Disk I/O Saturation - Shows utilization % and capacity %
  • Disk I/O Throughput - Write/Read MB/s with mirrored IOPS on right axis (dual Y-axis with dynamic scaling)
  • Disk I/O Latency - Write latency with queue depth on right axis

Redesigned Sensor Detail Page

The GUI sensor detail page has been completely redesigned to provide a unified view of all sensor performance data:

New sensor detail page with unified monitoring view

The new layout includes:

Statistics Dashboard

A comprehensive table showing real-time metrics organized into columns:

• CALLS & TRAFFIC - Active calls, total calls, traffic rate, packet counters (SIP, RTP, etc.)
• CPU USAGE - Per-thread CPU breakdown (t1, t2 workers, RTP threads, TAR compress, etc.)
• MEMORY & BUFFERS - RSS/VSZ, TCMalloc stats, heap hashtable, buffers, queues
• DISK I/O - All new I/O metrics with color-coded warnings
• SQL & SYSTEM - SQL queue stats, load average, TLB entries

Real-time Thread Monitor

• Live CPU usage for all ~70 sniffer threads
• Mini sparkline graphs showing CPU history
• Color-coded indicators (green/orange/red based on usage)
• Sortable by CPU integral (Σ) to identify consistently busy threads
• Refresh interval controls (1s, 2s, 5s, 10s)

RRD Performance Graphs

• Time period selection from 1 hour to 10 years
• Graphs displayed in organized groups:
  • CPU, Load averages, Memory
  • Disk I/O Saturation, Throughput, Latency (NEW)
  • Heap/Buffers, Network speed, Packet drops
  • Calls, SQL queues
  • Packet statistics

Why This Matters

These improvements make it significantly easier to identify performance bottlenecks:

• CPU Bottlenecks - The thread monitor immediately shows which threads are overloaded. The critical t0 (packet capture) thread is highlighted - if it reaches 90%+, packets will be dropped.

• I/O Bottlenecks - The new Disk I/O metrics show exactly when your storage cannot keep up:
  • High Capacity % means you're approaching the disk's throughput limit
  • High Latency ratio (current/baseline) indicates I/O contention
  • DISK_SAT status means immediate action is needed

• Historical Analysis - RRD graphs let you correlate issues across time - see if CPU spikes coincide with I/O saturation or traffic bursts.

Configuration

Disk I/O monitoring is enabled by default. Configuration options in voipmonitor.conf:

; Disk I/O monitoring (enabled by default when spooldir is set)
disk_io_monitor = yes

; Warning threshold (percentage of calibrated capacity)
disk_io_warning_threshold = 80

; Saturation threshold
disk_io_saturation_threshold = 95

; Recalibrate baseline (useful after hardware changes)
; Send manager command: disk_io_recalibrate

Availability

These features are available in:

• Sniffer version 2026.01.3 and newer
• GUI version 2026.1.3 and newer

For questions or feedback, please contact support@voipmonitor.org.